Larson storm door handle installation pdf

cumsrihpacal1975

2025-03-2100:00:02

File name: Larson storm door handle installation pdf

Rating: 4.9 / 5 (4941 votes)

Downloads: 1129

Download link: >>CLICK HERE<<





















StepAttach Storm Door to Door Frame. Looking at your door opening from the outside, determine which side you want the hinge on. G. On edge of door, centerpunch and drill 1/8 pilot holes and install mortise plate to STEPOUTSIDE HANDLE AND ESCUTCHEON PLATE ASSEMBLY. StepStorm Door Expander. Then position inside latch onto spindle on inside of door. IMPORTANT NOTICE: If you choose to have the Fold template along dotted line prior to tapingFollow the drilling instructions on the Hold the handles tightly together and tighten set screw on inside handle with hex wrench. StepSet Placeholder Screw for Hinge Rail. (FIG.2) DRILLING INSTRUCTIONS SURFACE MOUNT LOCK INSTALLATION INSTRUCTIONS BEFORE INSTALLATION Your Larson storm door is R E V E R S AH I N G E™ meaning that the door is designed for either right hand or left hand hinge installation. StepAttach Hinge Rail to Storm Door. StepStorm Door Expander. StepAttach Hinge Rail to Storm Door. StepTools Needed & Determine Hinging. On the inside of the door, insert key cylinder through the latch assembly, aligning the screw hole in the StepTools Needed & Determine Hinging. Secure firmly with x /4 machine screws Place the drilling template on your storm door at the desired height, making sure that this hardware will not interfere with prime door hardware. StepInstall Handle and Strike Plate REVERSE: HANDLE: handle _: LATCH If not pre-assembled, insert handle into handle housing (Fig 2)Place spring onto spindle, as shown, and insert into handle assembly (Fig 3)Push this assembly through drilled holes from the outside of door (Fig 4). StepSet Placeholder Screw for Hinge Rail. StepInstall the Drip Cap. StepInstall Latch Rail. Turn your new door upside down to have the hinge on the opposite side. StepAttach TYPECLOSER INSTALLATION CLOSER INSTALLATION Tape the template on the inside of the storm door as indicated on the template. We recommend to from the bottom of the door to the center of the outside lever.

Comments